 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Idaho Material
Handling, Inc. |
|
|
||
 |
||
|
Pushbutton
control for low to medium volume dock operations
|
||
 |
Medium price range |
 |
|
Simple pushbutton dock control | |
|
Low voltage consumption |
|
|
Low risk of back injury due to push button controls |
|
|
Spring counterbalance dock system |
|
|
6'0"*, 6'6" & 7'0" dock widths available (*std) |
|
|
6'0" and 8'0"* nominal dock lengths available (*std) |
|
|
20,000 to 45,000 lb. dock capacities available |
|
|
Insulated deck options |
|
|
Seals for weather and rodent protection at the dock |
|
|
Longer lips for refrigerated and specialty trailers |
|
|
Clean pit dock frames optional |
|
|
|
||
|
||
|
Pushbutton
control for ease of use and/or high volume dock operations
|
||
|
Heaviest duty dock leveler available |
 |
|
Lowest maintenance cost dock leveler | |
|
Automatic dock storing capabilities optional |
|
|
Vertical storing or standard dock pit design |
|
|
Low risk of back injury due to push button controls |
|
|
6'0"*, 6'6" & 7'0" dock widths available (*std) |
|
|
6'0" and 8'0"* nominal dock lengths available (*std) |
|
|
20,000 to 80,000 lb. capacities available |
|
|
Insulated deck options |
|
|
Seals for weather and rodent protection at the dock |
|
|
Pit mounted scissors lift docks |
|
|
Longer lips for refrigerated and specialty trailers |
|
|
Clean pit dock frames optional |
|
|
|
||
|
||
|
Safety
lock to secure trucks to buildings during loading and unloading
operations
|
||
|
Manual dock units with gas spring counterbalance system for low cost |
 |
|
Electric dock units for ease of use | |
|
Can be interlocked to the doors and dock levelers to require proper and safe use |
|
|
Operational lights to keep dock and truck operators informed of working status | |
|
Master control panels available for dock leveler, dock restraint and door operators | |
|
|
||
|
||
|
For
most standard door sizes
|
||
|
Lowest cost truck dock seal available |
 |
|
Requires solid wall that will withstand pressure from trucks | |
|
Vinyl fabrics for tear resistance and long life |
|
|
Hypalon fabrics for weather resistance and longer life |
|
|
Armour pleats to protect the face of dock pad from premature wear |
|
|
Beveled side pads to reduce dock pad wear and exposure |
|
|
Taper side pads to accommodate inclining or declining approaches |
|
|
Adjustable dock head curtains and movable head pads available |
|
|
Best seal available on truck | |
|
|
||
|
||
|
For
oversize doors and full truck access
|
||
|
For oversize dock door openings |
 |
|
Provides full access to back of truck | |
|
Limited pressure on building dock wall |
|
|
Allows wide variety of truck sizes | |
|
Air inflatable side pads for increased effectiveness of trailer seal & wider range of truck sizes | |
|
|
||
|
||
|
Portable
or temporary equipment for low cost versatility
|
||
|
Aluminum truck plates for pallet jack or cart traffic |
 |
|
Aluminum & Steel truck boards for forklift traffic | |
|
Yard ramps for lift truck access without a dock high building |
|
|
Ramps for ground to truck access with carts and hand trucks |
|
|
Hydraulic scissors lifts | |
|
|
||
|
||
|
Idaho
Material Handling employs full time service & installation people
to properly install and support your dock operations
|
||
|
Insured |
 |
|
Licensed | |
|
Trained |
|
|
Experienced |
|
|
Fully outfitted service vehicles |
|
|
Proper tooling for the project |
|
|
Retrofits | |
|
Service contracts |
|
|
|
||
| A subsidiary of HOJ Engineering and Sales | Member MHEDA |
 |